Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 49
ip ftp password, ip ftp source-interface
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Usage The hostname is used in the prompt. Information ip ftp password Specify a password for outgoing FTP connections. Syntax Parameters ip ftp password [encryption-type] password encryption-type password (OPTIONAL) Enter one of the following numbers: • 0 (zero) for an unecrypted (clear text) password • 7 (seven) for hidden text password Enter a string up to 40 characters as the password. Defaults Not configured. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The password is listed in the configuration file; you can view the password using the show running-config ftp command in EXEC mode. Use the password configured by the ip ftp password command when you use the ftp: parameter in the copy command. Related Commands copy ip ftp username Copies the files. Sets the user name for the FTP sessions. ip ftp source-interface Specify an interface's IP address as the source IP address for FTP connections. Syntax ip ftp source-interface interface Parameters interface Enter the following keywords and slot/port or number information: • For Loopback interfaces, enter the keyword loopback followed by a number from zero (0) to 16383. • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Defaults The IP address on the system that is closest to the Telnet address is used in the outgoing packets. Control and Monitoring | 49