Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 224

www.dell.com | support.dell.com Related Commands to GVRP Participants running on no ports show gvrp statistics Displays the GVRP statistics. show gvrp statistics Display the GVRP configuration statistics. Syntax show gvrp statistics {interface interface | summary} Parameters interface interface summary Enter the keyword interface followed by one of the interface keywords and slot/ port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Enter the keyword summary to display just a summary of the GVRP statistics. Defaults none Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 12-3. show gvrp statistics Command Example FTOS#show gvrp statistics int tengig 1/0 Join Empty Received: 0 Join In Received: 0 Empty Received: 0 LeaveIn Received: 0 Leave Empty Received: 0 Leave All Received: 40 Join Empty Transmitted: 156 Join In Transmitted: 0 Empty Transmitted: 0 Leave In Transmitted: 0 Leave Empty Transmitted: 0 Leave All Transmitted: 41 Invalid Messages/Attributes skipped: 0 Failed Registrations: 0 FTOS# Usage Information Invalid messages/attributes skipped can occur in the following cases: • The incoming GVRP PDU has an incorrect length. • "End of PDU" was reached before the complete attribute could be parsed. • The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type (0x01). 224 | GARP VLAN Registration (GVRP)