Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 674
The VRRP group only becomes active and sends VRRP packets when a virtual IP address is
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 674 highlights
www.dell.com | support.dell.com vrrp-group Assign a VRRP ID to an interface. You can configure up to 12 VRRP groups per interface. Syntax vrrp-group vrrp-id Parameters vrrp-id Enter a number as the group ID. Range: 1 to 255. Defaults Not configured. Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage The VRRP group only becomes active and sends VRRP packets when a virtual IP address is Information configured. When you delete the virtual address, the VRRP group stops sending VRRP packets. Related Commands virtual-address Assigns up to 12 virtual IP addresses per VRRP group. 674 | Virtual Router Redundancy Protocol (VRRP)
674
|
Virtual Router Redundancy Protocol (VRRP)
www.dell.com | support.dell.com
vrrp-group
Assign a VRRP ID to an interface. You can configure up to 12 VRRP groups per interface.
Syntax
vrrp-group
vrrp-id
Parameters
Defaults
Not configured.
Command Modes
INTERFACE
Command
History
Usage
Information
The VRRP group only becomes active and sends VRRP packets when a virtual IP address is
configured. When you delete the virtual address, the VRRP group stops sending VRRP packets.
Related
Commands
vrrp-id
Enter a number as the group ID.
Range: 1 to 255.
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
virtual-address
Assigns up to 12 virtual IP addresses per VRRP group.