Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 480
show qos class-map, show qos class-map Command Example
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 480 highlights
www.dell.com | support.dell.com set Mark outgoing traffic with a Differentiated Service Code Point (DSCP) or dot1p value. Syntax set {ip-dscp value | mac-dot1p value} Parameters ip-dscp value mac-dot1p value (OPTIONAL) Enter the keyword ip-dscp followed by the IP DSCP value. Range: 0 to 63 Enter the keyword mac-dot1p followed by the dot1p value. Range: 0 to 7 On the MXL Switch, allowed values are:0,2,4,6 Defaults none Command Modes CONFIGURATION (conf-qos-policy-in) Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage After the IP DSCP bit is set, other QoS services can then operate on the bit settings. Information show qos class-map View the current class map information. Syntax show qos class-map [class-name] Parameters class-name (OPTIONAL) Enter the name of a configured class map. Defaults none Command Modes EXEC EXEC Privilege Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 25-1. show qos class-map Command Example FTOS#show qos class-map Class-map match-any CM Match ip access-group ACL Related Commands class-map Identifies the class map. 480 | Quality of Service (QoS)