Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 549
radius-server deadtime, radius-server host
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 549 highlights
Parameters interface Enter the following keywords and slot/port or number information: • For Loopback interfaces, enter the keyword loopback followed by a number from zero (0) to 16838. • For the Null interface, enter the keywords null 0. • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Defaults Not configured. Command Mode CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module radius-server deadtime Configure a time interval during which non-responsive RADIUS servers to authentication requests are skipped. Syntax radius-server deadtime seconds To disable this function or return to the default value, use the no radius-server deadtime command. Parameters seconds Enter a number of seconds during which non-responsive RADIUS servers are skipped. Range: 0 to 2147483647 seconds. Default: 0 seconds. Defaults 0 seconds Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module radius-server host Configure a RADIUS server host. Syntax radius-server host {hostname | ipv4-address} [auth-port port-number] [retransmit retries] [timeout seconds] [key [encryption-type] key] Parameters hostname ipv4-address Enter the name of the RADIUS server host. Enter the IPv4 address (A.B.C.D) of the RADIUS server host. Security | 549