Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 91
Access Control Lists (ACL), Overview, Commands Common to all ACL Types
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
6 Access Control Lists (ACL) Overview The Dell Force10 operating software (FTOS) supports the following types of access control lists (ACLs), IP prefix lists, and route maps: • Commands Common to all ACL Types • Common IP ACL Commands • Standard IP ACL Commands • Extended IP ACL Commands • Common MAC Access List Commands • Standard MAC ACL Commands • Extended MAC ACL Commands • IP Prefix List Commands • Route Map Commands Note: For ACL commands used in the Trace function, refer to the Secure DHCP Commands section in the chapter Security. Commands Common to all ACL Types The following commands are available within each ACL mode and do not have mode-specific options. Some commands may use similar names, but require different options to support the different ACL types (for example, deny). • description • remark • resequence access-list • resequence prefix-list ipv4 • show config Access Control Lists (ACL) | 91