Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 664

www.dell.com | support.dell.com Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Dell Force10 recommends keeping the default setting for this command. If you do change the time interval between VRRP advertisements on one router, you must change it on all routers. authentication-type Enable authentication of VRRP data exchanges. Syntax authentication-type simple [encryption-type] password To delete an authentication type and password, use the no authentication-type command. Parameters simple encryption-type password Enter the keyword simple to specify simple authentication. (OPTIONAL) Enter one of the following numbers: • 0 (zero) for an un-encrypted (clear text) password • 7 (seven) for hidden text password. Enter a character string up to 8 characters long as a password. If you do not enter an encryption-type, the password is stored as clear text. Defaults Not configured. Command Modes VRRP Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The password is displayed in the show config output if the encryption-type is unencrypted or clear text. If you choose to encrypt the password, the show config displays an encrypted text string. clear counters vrrp Clear the counters maintained on VRRP operations. Syntax clear counters vrrp [vrrp-id] Parameters vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. Range: 1 to 255 Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 664 | Virtual Router Redundancy Protocol (VRRP)