Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 159
dcb-policy input stack-unit stack-ports all, dcb-policy output
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
dcb-policy input stack-unit stack-ports all Apply the specified DCB input policy on all ports of the switch stack or a single stacked switch. Syntax dcb-policy input stack-unit {all | stack-unit-id} stack-ports all dcb-input-policy-name To remove all DCB input policies applied to the stacked ports and rest the PFC to its default settings, use the no dcb-policy input stack-unit all command. To remove only the DCB input policies applied to the specified switch, use the no dcb-policy input stack-unit command. Parameters stack-unit-id dcb-input-policyname Enter the stack unit identification. Enter the policy name for the DCB input policy. Defaults None Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information The dcb-policy input stack-unit all command overwrites any previous dcb-policy input stack-unit stack-unit-id configurations. Similarly, a dcb-policy input stack-unit stack-unit-id command overwrites any previous dcb-policy input stack-unit all configuration. Related Commands dcb-policy output stack-unit Apply the specified DCB output policy. stack-ports all dcb-policy output Apply the output policy with the ETS configuration to an egress interface. Syntax dcb-policy output policy-name To delete the output policy, use the no dcb-policy output command. Parameters policy name Enter the output policy name. Defaults none Command Modes INTERFACE Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module When you apply an ETS output policy to on interface, ETS-configured scheduling and bandwidth allocation take precedence over any configured settings in QoS output policies. Data Center Bridging | 159