Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 596
default logging monitor, default logging trap, logging
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 596 highlights
www.dell.com | support.dell.com default logging monitor Return to the default settings for messages logged to the terminal. Syntax default logging monitor Defaults level = 7 or debugging Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands logging monitor terminal monitor Sets the logging monitor parameters. Sends system messages to the terminal/monitor. default logging trap Return to the default settings for logging messages to the Syslog servers. Syntax default logging trap Defaults level = 6 or informational Command Modes CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module logging trap Limits the messages logged to the Syslog servers based on severity. logging Syntax Configure an IP address or host name of a Syslog server where logging messages will be sent. Multiple logging servers of IPv4 can be configured. logging {ipv4-address | hostname} To disable logging, enter no logging. Parameters ipv4-address hostname Enter an IPv4 address (A.B.C.D). Enter the name of a host already configured and recognized by the switch. Defaults Disabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module 596 | Simple Network Management Protocol (SNMP) and Syslog