Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 38
banner exec, asf-mode
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
www.dell.com | support.dell.com asf-mode Enable alternate store and forward (ASF) mode and forward packets as soon as a threshold is reached. Syntax asf-mode stack-unit {unit-id | all} queue size To return to standard store and forward mode, use the no asf-mode stack-unit command. Parameters unit-id queue size Enter the stack member unit identifier of the stack member to reset. Range: 0 - 5 all Enter the queue size of the stack member. Range: 1 - 15 Defaults Not configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Information You must save the configuration and reload the system to implement ASF. When you enter the command, the system sends a message stating that the new mode is enabled when the system reloads. banner exec Configure a message that is displayed when a user enters EXEC mode. Syntax banner exec c line c Parameters c line Enter the keywords banner exec, and then enter a character delineator, represented here by the letter c, and press ENTER. Enter a text string for your banner message ending the message with your delineator. In the example below, the delineator is a percent character (%); the banner message is "testing, testing". Defaults No banner is displayed. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Optionally, use the banner exec command to create a text string that is displayed when the user accesses EXEC mode. The exec-banner command toggles that display. 38 | Control and Monitoring