Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 600

www.dell.com | support.dell.com Usage When the number of messages reaches the limit you set with the logging history size command, older Information messages are deleted as newer ones are added to the table. Related Commands show logging history Displays information logged to the history buffer. logging monitor Specify which messages are logged to Telnet applications. Syntax logging monitor [level] To disable logging to terminal connections, use the no logging monitor command. Parameters level Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging. Defaults 7 or debugging Command Modes CONFIGURATION Command History Related Commands Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module default logging monitor Returns the logging monitor parameters to the default setting. logging on Specify that debug or error messages are asynchronously logged to multiple destinations, such as logging buffer, Syslog server, or terminal lines. Syntax logging on To disable logging to logging buffer, Syslog server and terminal lines, use the no logging on command. Defaults Enabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage When you use the no logging on command, messages are logged only to the console. Information Related Commands logging logging buffered logging console logging monitor Enables logging to Syslog server. Sets the logging buffered parameters. Sets the logging console parameters. Sets the logging parameters for the terminal connections. 600 | Simple Network Management Protocol (SNMP) and Syslog