Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 591
snmp-server trap-source, snmp-server user
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 591 highlights
snmp-server trap-source Configure a specific interface as the source for SNMP traffic. Syntax snmp-server trap-source interface To disable sending traps out a specific interface, use the no snmp trap-source command. Parameter interface Enter the following keywords and slot/port or number information: • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults The IP address assigned to the management interface is the default. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage For this snmp-server trap-source command to be enabled, you must configure an IP address on the Information interface and enable the interface configured as an SNMP trap source. Related Commands snmp-server community Sets the community string. snmp-server user Configure a new user to an SNMP group. Syntax snmp-server user name {group_name remote ip-address udp-port port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-password] [priv des56 priv password] [access-list-name] To remove a user from the SNMP group, use the no snmp-server user name {group_name remote ip-address udp-port port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-password] [priv des56 priv password] [access-list-name] command. Parameters name group_name remote ip-address Enter the name of the user (not to exceed 20 characters), on the host, that connects to the agent. Enter a text string (up to 20 characters long) as the name of the group. Defaults: The following groups are created for mapping to read/write community/security-names. • v1v2creadu - maps to a community with ro permissions • v1v2cwriteu - maps to a community rw permissions Enter the keyword remote followed by the IP address that identifies the copy of the SNMP on the remote device. Simple Network Management Protocol (SNMP) and Syslog | 591