Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 557
ip ssh authentication-retries, ip ssh connection-rate-limit
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 557 highlights
Parameters directory Enter a directory name. Defaults The internal flash (flash:) is the default directory. Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module To configure the switch as a SCP server, use the ip ssh server command. Related Commands ip ssh server Enables the SSH and SCP server on the switch. ip ssh authentication-retries Configure the maximum number of attempts that should be used to authenticate a user. Syntax Parameters ip ssh authentication-retries 1-10 1-10 Enter the number of maximum retries to authenticate a user. Range: 1 to 10 Default: 3 Defaults 3 Command Modes CONFIGURATION Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module This command specifies the maximum number of attempts to authenticate a user on a SSH connection with the remote host for password authentication. SSH disconnects when the number of password failures exceeds authentication-retries. ip ssh connection-rate-limit Configure the maximum number of incoming SSH connections per minute. Syntax Parameters ip ssh connection-rate-limit 1-10 1-10 Enter the number of maximum number of incoming SSH connections allowed per minute. Range: 1 to 10 per minute Default: 10 per minute Defaults 10 per minute Command Modes CONFIGURATION Security | 557