Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 232
ip igmp snooping last-member-query-interval, ip igmp snooping mrouter
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
www.dell.com | support.dell.com ip igmp snooping last-member-query-interval The last member query interval is the maximum response time inserted into Group-Specific queries sent in response to Group-Leave messages. This interval is also the interval between successive Group-Specific Query messages. Use this command to change the last member query interval. Syntax ip igmp snooping last-member-query-interval milliseconds To return to the default value, enter no ip igmp snooping last-member-query-interval. Parameters milliseconds Enter the interval in milliseconds. Default: 1000 milliseconds Range: 100 to 65535 Defaults 1000 milliseconds Command Modes INTERFACE VLAN Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module ip igmp snooping mrouter Statically configure a VLAN member port as a multicast router interface. Syntax ip igmp snooping mrouter interface interface To delete a specific multicast router interface, use the no igmp snooping mrouter interface interface command. Parameters interface interface Enter the following keywords and slot/port or number information: • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1 to 128 Defaults Not configured Command Modes INTERFACE VLAN - (conf-if-vl-n) Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module FTOS provides the capability of statically configuring interface to which a multicast router is attached. To configure a static connection to the multicast router, enter the ip igmp snooping mrouter interface command in the VLAN context. The interface to the router must be a part of the VLAN where you are entering the command. 232 | Internet Group Management Protocol (IGMP)