Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 303
ip proxy-arp, ip route
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Parameters ipv4-address ipv4-address2... ipv4-address6 Enter the IPv4 address, in dotted decimal format, of the name server to be used. (OPTIONAL) Enter up five more IPv4 addresses, in dotted decimal format, of name servers to be used. Separate the addresses with a space. Defaults No name servers are configured. Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage FTOS does not support sending DNS queries over a VLAN. DNS queries are sent out all other Information interfaces, including the Management port. ip proxy-arp Enable Proxy ARP on an interface. Syntax ip proxy-arp To disable Proxy ARP, enter no ip proxy-arp. Defaults Enabled. Command Modes INTERFACE Command History Related Commands Version 8.3.16.1 show ip interface Introduced on MXL 10/40GbE Switch IO Module Displays the interface routing status and configuration. ip route Assign a static route to the switch. Syntax ip route destination mask {ip-address | interface [ip-address]} [distance] [permanent] [tag tag-value] To delete a specific static route, use the no ip route destination mask {address | interface [ip-address]} command. To delete all routes matching a certain route, use the no ip route destination mask command. Parameters destination mask ip-address Enter the IP address in dotted decimal format of the destination device. Enter the mask in slash prefix formation (/x) of the destination device's IP address. Enter the IP address in dotted decimal format of the forwarding router. IPv4 Routing | 303