Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 165
fcoe priority-bits, iscsi priority-bits
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Related Commands dcb-output dcb-policy output Create a DCB output policy. Apply the output policy. fcoe priority-bits Configure the FCoE priority advertised for the FCoE protocol in application priority TLVs. Syntax fcoe priority-bits priority-bitmap To remove the configured FCoE priority, use the no fcoe priority-bits command. Parameters priority-bitmap Enter the priority-bitmap range. The valid range is 1 to FF. Defaults 0x8 Usage This command is available at the global level only. Information Command Modes PROTOCOL LLDP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module iscsi priority-bits Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs. Syntax iscsi priority-bits priority-bitmap To remove the configured iSCSI priority, use the no iscsi priority-bits command. Parameters priority-bitmap Enter the priority bitmap. The valid range is 1 to FF. Defaults 0x10 Usage This command is available at the global level only. Information Command Modes PROTOCOL LLDP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Data Center Bridging | 165