Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 559
ip ssh password-authentication, ip ssh pub-key-file
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 559 highlights
Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module The server-generated key is used for SSHv1 key-exchange. ip ssh password-authentication Enable password authentication for the SSH server. Syntax ip ssh password-authentication enable To disable password-authentication, use the no ip ssh password-authentication enable command. Parameters enable Enter the keyword enable to enable password-authentication for the SSH server. Defaults Enabled Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage With password authentication enabled, you can authenticate using local, RADIUS, or TACACS+ Information password fallback order as configured. ip ssh pub-key-file Specify the file to be used for host-based authentication. Syntax ip ssh pub-key-file {WORD} Parameters WORD Enter the file name for the host-based authentication. Defaults none Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Example Figure 29-6. ip ssh pub-key-file Command Example FTOS#conf FTOS(conf)# ip ssh pub-key-file flash://knownhosts FTOS(conf)# Security | 559