Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 333
lacp port-priority, lacp system-priority, port-channel mode
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 333 highlights
Usage This command applies to dynamic port-channel interfaces only. When applied on a static port-channel, Information the command has no effect. Related Commands show lacp Displays the lacp configuration lacp port-priority Configure the port priority to influence which ports will be put in standby mode when there is a hardware limitation that prevents all compatible ports from aggregating. Syntax lacp port-priority priority-value To return to the default setting, use the no lacp port-priority priority-value command. Parameters priority-value Enter the port-priority value. The higher the value number the lower the priority. Range: 1 to 65535 Default: 32768 Defaults 32768 Command Modes INTERFACE Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module lacp system-priority Configure the LACP system priority. Syntax Parameters lacp system-priority priority-value priority-value Enter the system-priority value. The higher the value, the lower the priority. Range: 1 to 65535 Default: 32768 Defaults 32768 Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module port-channel mode Configure the LACP port channel mode. Syntax port-channel number mode [active] [passive] [off] Link Aggregation Control Protocol (LACP) | 333