Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 219
debug gvrp, disable
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
Related Commands show gvrp statistics Displays the GVRP statistics debug gvrp Enable debugging on GVRP. Syntax Parameters debug gvrp {config | events | pdu} To disable debugging, use the no debug gvrp {config | events | pdu} command. config event pdu Enter the keyword config to enable debugging on the GVRP configuration. Enter the keyword event to enable debugging on the JOIN/LEAVE events. Enter the keyword pdu followed one of the following Interface keywords and slot/port or number information: • For a Port Channel interface, enter the keyword port-channel followed by a number: Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Disabled Command Modes EXEC Privilege Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module disable Globally disable GVRP. Syntax disable To re-enable GVRP, use the no disable command. Defaults Enabled Command Modes CONFIGURATION-GVRP Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Related Commands gvrp enable protocol gvrp Enables GVRP on physical interfaces and LAGs. Accesses the GVRP protocol. GARP VLAN Registration (GVRP) | 219