Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 74
Command Example Partial, Ctrl-z - tech
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
www.dell.com | support.dell.com Figure 4-31. show tech-support Command Example (Partial) FTOS#show tech-support stack-unit 0 Required Type : - -- Unit 5 -Unit Type Status Required Type : Member Unit : not present : - show environment -- Unit Environment Status -- Unit Status Temp Voltage * 1 online 41C ok * Management Unit -- Thermal Sensor Readings (deg C) -- Unit Sensor0 Sensor1 1 39 41 show ip traffic IP statistics: Rcvd: 894390 total, 415557 local destination 0 format errors, 0 checksum errors, 0 bad hop count 0 unknown protocol, 0 not a gateway 15 security failures, 0 bad options Frags: 0 reassembled, 0 timeouts, 0 too big 0 fragmented, 0 couldn't fragment Bcast: 402 received, 0 sent; Mcast: 37 received, 0 sent Sent: 468133 generated, 0 forwarded 42 encapsulation failed, 0 no route ICMP statistics: Rcvd: 0 format errors, 0 checksum errors, 0 redirects, 2 unreachable 0 echo, 0 echo reply, 0 mask requests, 0 mask replies, 0 quench 0 parameter, 0 timestamp, 0 info request, 0 other Sent: 0 redirects, 0 unreachable, 0 echo, 0 echo reply 0 mask requests, 0 mask replies, 0 quench, 0 timestamp 0 info reply, 0 time exceeded, 0 parameter problem UDP statistics: Rcvd: 396516 total, 0 checksum errors, 0 no port 0 short packets, 0 bad length, 28746 no port broadcasts, 0 socket full Sent: 16460 total, 28746 forwarded broadcasts TCP statistics: Rcvd: 4618 total, 0 checksum errors, 0 no port Sent: 5023 total ARP statistics: Rcvd: 43988 requests, 24518 replies, 10 wrong interface Sent: 42 requests, 6 replies (0 proxy) Usage Without the page or stack-unit option, the command output is continuous, use Ctrl-z to interrupt the Information command output. The save option works with other filtering commands. This allows you to save specific information of a show command. The save entry must always be the last option. For example: FTOS#show tech-support |grep regular-expression |except regular-expression | find regular-expression | save flash://result 74 | Control and Monitoring