Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 541

Defaults No password is configured. level = 15 Command Modes CONFIGURATION Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage Use this command to define a password for a level. Use the privilege level (CONFIGURATION mode) Information command to control access to command modes. Passwords must meet the following criteria: • Start with a letter, not a number. • Passwords can have a regular expression as the password. To create a password with a regular expression in it, you must use CNTL + v prior to entering regular expression. For example, to create the password abcd]e, you type "abcd CNTL v ]e". When the password is created, you do not use the CNTL + v key combination and enter "abcd]e". Note: The question mark (?) and the tilde (~) are not supported characters. Related Commands show running-config privilege level (CONFIGURATION mode) Views the current configuration. Controls access to command modes within the switch. enable restricted Allows Dell Force10 technical support to access restricted commands. Syntax enable restricted [encryption-type] password To disallow access to restricted commands, use the no enable restricted command. Parameters encryption-type password (OPTIONAL) Enter the number 7 as the encryption type. Enter 7 followed a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Force10 router. Use this parameter only with a password that you copied from the show running-config file of another Dell Force10 router. Enter a text string, up to 32 characters long, as the clear text password. Command Modes Not configured. Command History Usage Information Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Only Dell Force10 Technical Support staff use this command. Security | 541