Dell Force10 MXL Blade MXL 10/40GbE Switch IO Module FTOS Command Line Referen - Page 130
show config, show ip prefix-list detail
View all Dell Force10 MXL Blade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
www.dell.com | support.dell.com ge min-prefix-length le max-prefix-length bitmask number (OPTIONAL) Enter the keyword ge followed by the minimum prefix length, which is a number from zero (0) to 32. (OPTIONAL) Enter the keyword le followed by the maximum prefix length, which is a number from zero (0) to 32. Enter the keyword bitmask followed by a bit mask number in dotted decimal format. Defaults Not configured. Command Modes PREFIX-LIST Command History Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Usage If you do not use the options ge or le, only packets with an exact match to the prefix are filtered. Information Related Commands deny permit Configures a filter to drop packets. Configures a filter to pass packets. show config Display the current PREFIX-LIST configurations. Syntax show config Command Modes PREFIX-LIST Command History Example Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module Figure 6-9. show config Command Example FTOS(conf-nprefixl)#show config ! ip prefix-list snickers FTOS(conf-nprefixl)# show ip prefix-list detail Display details of the configured prefix lists. Syntax show ip prefix-list detail [prefix-name] Parameters prefix-name (OPTIONAL) Enter a text string as the name of the prefix list, up to 140 characters. Command Modes EXEC EXEC Privilege 130 | Access Control Lists (ACL)