IBM 84885BU User Manual - Page 86
power-supply
View all IBM 84885BU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
To replace the hot-swap power-supply cage, complete the following steps: 1. Align the tabs on the top of the power-supply cage with the tab slots on the underside of the top rear of the chassis, and slide the power-supply cage toward the rear of the chassis. 2. Secure the power-supply cage to the chassis with the four screws on the rear and the one screw on the side. 3. Replace the microprocessor air baffle. 4. Reinstall the hot-swap power supplies in the power-supply cage. 76 xSeries 226 Type 8488 and 8648: Hardware Maintenance Manual and Troubleshooting Guide
To
replace
the
hot-swap
power-supply
cage,
complete
the
following
steps:
1.
Align
the
tabs
on
the
top
of
the
power-supply
cage
with
the
tab
slots
on
the
underside
of
the
top
rear
of
the
chassis,
and
slide
the
power-supply
cage
toward
the
rear
of
the
chassis.
2.
Secure
the
power-supply
cage
to
the
chassis
with
the
four
screws
on
the
rear
and
the
one
screw
on
the
side.
3.
Replace
the
microprocessor
air
baffle.
4.
Reinstall
the
hot-swap
power
supplies
in
the
power-supply
cage.
76
xSeries
226
Type
8488
and
8648:
Hardware
Maintenance
Manual
and
Troubleshooting
Guide