Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 123

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Global Configuration To display this page, click System  ISDP  Basic  Global Configuration. A screen similar to the following displays. 1. Use Admin Mode to specify whether the ISDP Service is to be Enabled or Disabled. The default value is Enabled. 2. Use Timer to specify the period of time between sending new ISDP packets. The range is 5 to 254 seconds. Default value is 30 seconds. 3. Use Hold Time to specify the hold time for ISDP packets that the switch transmits. The hold time specifies how long a receiving device should store information sent in the ISDP packet before discarding it. The range 10 to 255 seconds. Default value is 180 seconds. 4. Use Version 2 Advertisements to enable or disable the sending of ISDP version 2 packets from the device. The default value is Enabled. The following table describes the ISDP Basic Global Configuration fields. Table 2-43. Field Neighbors table last time changed Device ID Device ID format capability Device ID format Description Specifies if Displays the device ID of this switch. Displays the device ID format capability. Displays the device ID format. Chapter 2. Configuring System Information | 123