Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 227

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IP Interface Configuration Use the IP Interface Configuration page to update IP interface data for this switch. To display the IP Interface Configuration page, click Routing IP Advanced  IP Interface Configuration. 1. Use Port to select the interface for which data is to be displayed or configured. 2. Use Description to enter the Description for the interface. 3. Use IP Address to enter the IP address for the interface. 4. Use Subnet Mask to enter the subnet mask for the interface. This is also referred to as the subnet/network mask, and defines the portion of the interface's IP address that is used to identify the attached network. 5. Use Routing Mode to enable or disable routing for an interface. The default value is enable. 6. Use Administrative Mode to enable/disable the Administrative Mode of the interface. The default value is enable. This mode is not supported for Logical VLAN Interfaces. 7. Use Forward Net Directed Broadcasts to select how network directed broadcast packets should be handled. If you select enable from the pull-down menu, network directed Chapter 4. Routing | 227