Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 318

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Link State Database Use the OSPFv3 Link State Database page to display the link state database. To display the Link State Database page, click Routing OSPFv3 Advanced  Link State Database. Table 44. Field Router ID Area ID Description The 32 bit integer in dotted decimal format that uniquely identifies the router within the autonomous system (AS). The Router ID is set on the OSPFv3 Configuration page. If you want to change the Router ID you must first disable OSPFv3. After you set the new Router ID, you must re-enable OSPFv3 to have the change take effect. The default value is 0.0.0.0, although this is not a valid Router ID. The ID of an OSPFv3 area to which one of the router interfaces is connected. An Area ID is a 32 bit integer in dotted decimal format that uniquely identifies the area to which an interface is connected. 318 | Chapter 4. Routing