Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 442
TACACS+ Server Configuration, Security, Management Security>, TACACS, TACACS+ Server, Priority
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 442 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual TACACS+ Server Configuration Use the TACACS+ Server Configuration page to configure up to five TACACS+ servers with which the switch can communicate. To display the TACACS+ Server Configuration page, click Security Management Security> TACACS+ TACACS+ Server Configuration. To configure TACACS+ server settings: 1. Use TACACS+ Server to enter the configured TACACS+ server IP address. 2. Use Priority to specify the order in which the TACACS+ servers are used. It should be within the range 0-65535. 3. Use Port to specify the authentication port. It should be within the range 0-65535. 4. Use Key String to specify the authentication and encryption key for TACACS+ communications between the device and the TACACS+ server. The valid range is 0-128 characters. The key must match the encryption used on the TACACS+ server. 5. Use Connection Timeout to specify the amount of time that passes before the connection between the device and the TACACS+ server time out. The range is between 1-30. 6. Click ADD to add a new server to the switch. This button is only available to READWRITE users. These changes will not be retained across a power cycle unless a save is performed. 7. Click DELETE to delete the selected server from the configuration. 442 | Chapter 6. Managing Device Security