Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 360
PIM-DM Interface Configuration, Routing, Multicast, PIM-DM, Interface, Admin Mode, Hello Interval
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 360 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual PIM-DM Interface Configuration To display the PIM-DM Interface Configuration page, click Routing Multicast PIM-DM Interface Configuration. 1. Interface - The interface for which data is to be displayed or configured. You must have configured at least one router interface before configuring or displaying data for a PIM-DM interface. 2. Use Admin Mode to set the administrative status of PIM-DM for the selected interface. The default is disable. 3. Use Hello Interval to enter the number of seconds between PIM hello messages transmitted from the selected interface. The default value is 30. Valid values are from 10 to 3600. Table 65. Field Protocol State IP Address Neighbor Count Designated Router Description The operational state of the PIM-DM protocol on this interface. The IP address of the selected interface. The number of PIM neighbors on the selected interface. The designated router on the selected PIM interface. For point-to-point interfaces, this will be 0.0.0.0. 360 | Chapter 4. Routing