Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 84

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual The following table describes the Stack Configuration fields. Table 2-29. Field Hardware Management Preference Switch Status Management Status Description The hardware management preference of the switch. The hardware management preference can be disabled or unassigned. Displays the status of the selected unit. The possible values are: • OK • Unsupported • Code Mismatch • Config Mismatch • Not Present Displays whether the selected switch is the management unit or a normal stacking member or on standby. Stack Status The following table describes the Stack Status fields. Table 2-30. Field Unit ID Switch Description Serial Number Up Time Configured Model Identifier Plugged-in Model Identifier Expected Code Type Running Code Version Code Version in Flash Description Unit Id of the specific switch. The description for the unit can be configured by the user. The unique box serial number for this switch. Displays the relative time since the last reboot of the switch. This field displays the model type assigned by the device manufacturer to identify the device. This field displays the model type assigned by the device manufacturer to identify the plugged-in device. This field indicates the expected code type on this unit. This field indicates the detected version of code on this unit. Displays the Release number and version number of the code stored in flash. 84 | Chapter 2. Configuring System Information