Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 279
Routing, Advanced, Interface, Configuration, Area ID, Admin Mode, does not exist
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Interface Configuration Use the OSPF Interface Configuration page to configure an OSPF interface. To display the Interface Configuration page, click Routing OSPF Advanced Interface Configuration. 1. Interface - The interface for which data is to be displayed or configured. 2. Use Area ID to enter the 32-bit integer in dotted decimal format that uniquely identifies the OSPF area to which the selected router interface connects. If you assign an Area ID which does not exist, the area will be created with default values. 3. Use Admin Mode* to select enable or disable. The default value is 'disable.' You can configure OSPF parameters without enabling OSPF Admin Mode, but they will have no effect until you enable Admin Mode. The following information will be displayed only if the Chapter 4. Routing | 279