Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 62

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual DHCP Relay To display the DHCP Relay page, click System > Services> DHCP Relay. A screen similar to the following displays. DHCP Relay Configuration 1. Use Maximum Hop Count to enter the maximum number of hops a client request can take before being discarded. The range is (1 to 16). The default value is 4. 2. Use Admin Mode to select enable or disable radio button. When you select 'enable' DHCP requests will be forwarded to the IP address you entered in the 'Server Address' field. 3. Use Minimum Wait Time to enter a Minimum Wait Time in seconds. This value will be compared to the time stamp in the client's request packets, which should represent the time since the client was powered up. Packets will only be forwarded when the time stamp exceeds the minimum wait time. The range is (0 to 100). 4. Use Circuit ID Option Mode to enable or disable Circuit ID Option mode. If you select 'enable' Relay Agent options will be added to requests before they are forwarded to the server and removed from replies before they are forwarded to clients. 62 | Chapter 2. Configuring System Information