Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 186
MLD Snooping Interface Configuration, Fast Leave Admin mode
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual MLD Snooping Interface Configuration To access the MLD Snooping Interface Configuration page, click Switching Multicast MLD Snooping Interface Configuration. 1. Interface - Displays all physical, VLAN, and LAG interfaces. Select the interface you want to configure. 2. Use Admin Mode to select the interface mode for the selected interface for MLD Snooping for the switch. The default is disable. 3. Use Group Membership Interval(secs) to specify the amount of time you want the switch to wait for a report for a particular group on a particular interface before it deletes that interface from the group. The valid range is from (2 to 3600) seconds. The configured value must be greater than Max Response Time. The default is 260 seconds. 4. Use Max Response Time(secs) to specify the amount of time you want the switch to wait after sending a query on an interface because it did not receive a report for a particular group on that interface. Enter a value greater or equal to 1 and less than the Group Membership Interval in seconds. The default is 10 seconds. The configured value must be less than the Group Membership Interval. 5. Use Present Expiration Time to specify the amount of time you want the switch to wait to receive a query on an interface before removing it from the list of interfaces with multicast routers attached. Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero indicates an infinite time-out, i.e. no expiration. 6. Use Fast Leave Admin mode to select the Fast Leave mode for the a particular interface from the pull-down menu. The default is disable. 186 | Chapter 3. Configuring Switching Information