Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 567

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual The following table describes the Trap Log information displayed on the screen. The page also displays information about the traps that were sent. Click Clear Counters to clear all the counters. This resets all statistics for the trap logs to the default values. Table 7-116. Field Description Number of Traps Since Last The number of traps that have occurred since the switch last reboot. Reset Trap Log Capacity The maximum number of traps stored in the log. If the number of traps exceeds the capacity, the entries will overwrite the oldest entries. Number of Traps since log last viewed The number of traps that have occurred since the traps were last displayed. Displaying the traps by any method (terminal interface display, Web display, upload file from switch etc.) will cause this counter to be cleared to 0. Log The sequence number of this trap. System Up Time The time at which this trap occurred, expressed in days, hours, minutes and seconds since the last reboot of the switch. Trap Information identifying the trap. Chapter 7. Monitoring the System | 567