Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 145
Group Name, Protocols, VLAN ID, DELETE
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual 1. Use Group Name to assign a name to a new group. You may enter up to 16 characters. 2. Use Protocol(s) to select the protocols you want to be associated with the group. There are three configurable protocols: IP, IPX, ARP. • IP - IP is a network layer protocol that provides a connectionless service for the delivery of data. • ARP - Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps network layer addresses to physical medium access control (MAC) addresses • IPX - The Internetwork Packet Exchange (IPX) is a connectionless datagram Network-layer protocol that forwards data over a network. 3. Use VLAN ID to select the VLAN ID. It can be any number in the range of 1 to 4093. All the ports in the group will assign this VLAN ID to untagged packets received for the protocols you included in this group. 4. Click ADD to add a new Protocol Based VLAN group to the switch. 5. Click DELETE to remove the Protocol Based VLAN group identified by the value in the Group ID field. Table 3-50. Field Group ID Ports Description A number used to identify the group created by the user. Group IDs are automatically assigned when a group is created by the user. Display all the member ports which belong to the group. Chapter 3. Configuring Switching Information | 145