Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 323

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Route Redistribution This screen can be used to configure the OSPFv3 Route Redistribution parameters. The allowable range for each field is displayed next to it. If an invalid value is entered in one or multiple fields, an alert message will be displayed with the list of all the valid values. To display the Route Redistribution page, click Routing OSPFv3 Advanced  Route Redistribution. • Use Source to select those Source Protocols that have already been configured for redistribution by OSPFv3. The valid values are 'Static' and 'Connected'. • Use Redistribute Option to enable or disable the redistribution for the selected source protocol. • Use Metric to set the metric value to be used as the metric of redistributed routes. This field displays the metric if the source was pre-configured and can be modified. The valid values are 0 to 16777214. • Use Metric Type to set the OSPFv3 metric type of redistributed routes. • Use Tag to set the tag field in routes redistributed. This field displays the tag if the source was pre-configured, else a default tag value of 0 is displayed. The valid values are 0 to 4294967295. Router Discovery The Router Discovery protocol is used by hosts to identify operational routers on the subnet. Router Discovery messages are of two types: "Router Advertisements" and "Router Solicitations." The protocol mandates that every router periodically advertise the IP Addresses it is associated with. Hosts listen for these advertisements and discover the IP Addresses of neighboring routers. From the Router Discovery tab, you can access the following pages: Chapter 4. Routing | 323