Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 237

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual IPv6 Prefix Configuration To display the IPv6 Prefix Configuration page, click Routing IPv6 Advanced  Prefix Configuration. 1. Use Interface to select the interface to be configured. When the selection is changed, a screen refresh will occur causing all fields to be updated for the newly selected port. All physical interfaces are valid. 2. Use IPv6 Prefix/Prefix Length to specify the IPv6 prefix with prefix length for an interface. 3. Use EUI-64 to specify 64 bit unicast prefix. 4. Use Valid Lifetime to specify router advertisement per prefix time to consider prefix valid for purposes of on link determination. Valid lifetime must be in the range 0 to 4294967295. 5. Use Preferred Lifetime to specify router advertisement per prefix time. An auto configured address generated from this prefix is preferred. Preferred lifetime must be in range 0 to 4294967295. 6. Use OnLink Flag to specify selected prefix can be used for on-link determination. Default value is enable. This selector lists the two options for on-link flag: enable and disable. 7. Use Autonomous Flag to specify selected prefix can be used for autonomous address configuration. Default value is disable. This selector lists the two options for autonomous flag: enable and disable. Table 15. Field Description Current State Indicates the state of the IPV6 address. The state is TENT if routing is disabled or DAD fails. The state is Active if interface is active and DAD is successful. • Click ADD to add a new IPv6 address to the interface. • Click DELETE to delete a existing IPv6 address entry from the interface. Chapter 4. Routing | 237