Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 159
CST Port Configuration, Switching > STP >, Advanced, Interface, Port Priority
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual CST Port Configuration Use the Spanning Tree CST Port Configuration page to configure Common Spanning Tree (CST) and Internal Spanning Tree on a specific port on the switch. To display the Spanning Tree CST Port Configuration page, click Switching > STP > Advanced CST Port Configuration. To configure CST port settings: 1. Interface - One of the physical or port channel interfaces associated with VLANs associated with the CST. 2. Use Port Priority to specify the priority for a particular port within the CST. The port priority is set in multiples of 16. For example if the priority is attempted to be set to any value between 0 and 15, it will be set to 0. If it is tried to be set to any value between 16 and (2*16-1) it will be set to 16 and so on. Chapter 3. Configuring Switching Information | 159