Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 375

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual PIM-DM Interface Configuration To display the IPv6 PIM-DM Interface Configuration page, click Routing IPv6 Multicast PIM-DM  Interface Configuration. 1. Interface - The interface for which data is to be displayed or configured. You must have configured at least one router interface before configuring or displaying data for a PIM-DM interface. 2. Use Admin Mode to set the administrative status of PIM-DM for the selected interface. The default is disable. 3. Use Hello Interval to enter the number of seconds between PIM hello messages transmitted from the selected interface. The default value is 30. Valid values are from 10 to 3600. Table 71. Field Protocol State IPv6 Prefix/Length Neighbor Count Designated Router Description The operational state of the PIM-DM protocol on this interface. The IPv6 Address Prefix and the Length of the selected interface. The number of PIM neighbors on the selected interface. The designated router on the selected PIM interface. For point-to-point interfaces, this will be 0.0.0.0. Chapter 4. Routing | 375