Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 82
to update the information on the The following table describes the Basic Stack Status fields.
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual The following table describes the Stack Configuration fields. Table 2-27. Field Description Hardware Management Preference The hardware management preference of the switch. The hardware management preference can be disabled or unassigned. Switch Status Displays the status of the selected unit. The possible values are: • OK • Unsupported • Code Mismatch • Config Mismatch • Not Present Management Status Displays whether the selected switch is the management unit or a normal stacking member or on standby. The following table describes the Basic Stack Status fields. Table 2-28. Field Unit ID Switch Description Serial Number Description Unit Id of the specific switch. The description for the unit can be configured by the user. The unique box serial number for this switch. Up Time Displays the relative time since the last reboot of the switch. Configured Model Identifier This field displays the model type assigned by the device manufacturer to identify the device. Plugged-in Model Identifier This field displays the model type assigned by the device manufacturer to identify the plugged-in device. Expected Code Type This field indicates the expected code type on this unit. Running Code Version This field indicates the detected version of code on this unit. Code Version in Flash Displays the Release number and version number of the code stored in flash. Click REFRESH to update the information on the page. 82 | Chapter 2. Configuring System Information