Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 52

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual DHCP Server Configuration To display the DHCP Server Configuration page, click System > Services > DHCP Server> DHCP Server Configuration. A screen similar to the following displays. To enable or disable DHCP service: 1. Use Admin Mode to specify whether the DHCP Service is to be Enabled or Disabled. Default value is Disable. 2. Use Ping Packet Count to specify the number of packets a server sends to a Pool address to check for duplication as part of a ping operation. Default value is 2. Valid Range is (0, 2 to 10). Setting the value to 0 will disable the function. 3. Use Conflict Logging Mode to specify whether conflict logging on a DHCP Server is to be Enabled or Disabled. Default value is Enable. 4. Use Bootp Automatic Mode to specify whether Bootp for dynamic pools is to be Enabled or Disabled. Default value is Disable. 5. Click CANCEL to cancel the configuration on the screen. Resets the data on the screen to the latest value of the switch. 6. Click APPLY to send the updated configuration to the switch. Configuration changes take effect immediately. 52 | Chapter 2. Configuring System Information