Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 329
Routing, Advanced, Configuration, Admin Mode, Interface, Pre-empt Mode, Priority
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Advanced From the Advanced link, you can access the following pages: • VRRP Configuration on page 329 • VRRP Secondary IP on page 331 • Tracking Configuration on page 332 • Virtual Router Statistics on page 333 VRRP Configuration Use the VRRP Configuration page to enable or disable the administrative status of a virtual router. To display the VRRP Configuration page, click Routing VRRP Advanced VRRP Configuration. Global Configuration 1. Use Admin Mode to set the administrative status of VRRP in the router to active or inactive. Select enable or disable from the radio button. The default is disable. 2. VRID is only configurable if you are creating new Virtual Router, in which case enter the VRID in the range 1 to 255. 3. Use Interface to select the Unit/Slot/Port for the new Virtual Router from the pull-down menu. 4. Use Pre-empt Mode to select enable or disable. If you select enable, a backup router will preempt the master router if it has a priority greater than the master virtual router's priority provided the master is not the owner of the virtual router IP address. The default is enable. 5. Use Priority to enter the priority value to be used by the VRRP router in the election for the master virtual router. If the Virtual IP Address is the same as the interface IP Address, the priority gets set to 255 no matter what the user enters. If the user enters a priority of 255 when the Virtual and interface IP Addresses are not the same, the priority gets set to the default value of 100. 6. Use Advertisement Interval to enter the time, in seconds, between the transmission of advertisement packets by this virtual router. Enter a number between 1 and 255. The default value is 1 second. Chapter 4. Routing | 329