Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 370
Static Routes Configuration, Routing, Multicast, Static Routes, Configuration, Source IP, Source Mask
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Static Routes Configuration To display the Static Routes Configuration page, click Routing Multicast Static Routes Configuration. 1. Use Source IP to enter the IP Address that identifies the multicast packet source for the entry you are creating. 2. Use Source Mask to enter the subnet mask to be applied to the Source IP address. 3. Use RPF Neighbor to enter the IP address of the neighbor router on the path to the source. 4. Use Metric to enter the link state cost of the path to the multicast source. The range is 0 - 255 and the default is one. You can change the metric for a configured route by selecting the static route and editing this field. 5. Use RPF Interface to select the interface number. This is the interface that connects to the neighbor router for the given source IP address. 6. Click ADD to add a new static route to the switch. 7. Click DELETE to delete the multicast static routes selected. 370 | Chapter 4. Routing