Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 33
Network Interface, IPv4 Network Configuration
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Network Interface From the Network Interface link, you can access the following pages: • IPv4 Network Configuration on page 33 • IPv6 Network Configuration on page 35n • IPv6 Network Neighbor on page 37 IPv4 Network Configuration To display the IPv4 Network Configuration page, click System > Management > Network Interface > IPv4 Network Configuration. A screen similar to the following displays. The network interface is the logical interface used for in-band connectivity with the switch via any of the switch's front panel ports. The configuration parameters associated with the switch's network interface do not affect the configuration of the front panel ports through which traffic is switched or routed To access the switch over a network you must first configure it with IP information (IP address, subnet mask, and default gateway). You can configure the IP information using any of the following: • BOOTP • DHCP • Terminal interface via the EIA-232 port Chapter 2. Configuring System Information | 33