Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 459

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual 1. Use SSH Admin Mode to Enable or Disable the administrative mode of SSH. The currently configured value is shown when the web page is displayed. The default value is Disable. 2. Use SSH Version 1 to Enable or Disable Protocol Level 1 for SSH. The currently configured value is shown when the web page is displayed. The default value is Enable. 3. Use SSH Version 2 to Enable or Disable Protocol Level 2 for SSH. The currently configured value is shown when the web page is displayed. The default value is Enable. 4. Use SSH Session Timeout to configure the inactivity time-out value for incoming SSH sessions to the switch. The acceptable range for this value is (1-160) minutes. 5. Use Maximum Number of SSH Sessions to configure the maximum number of inbound SSH sessions allowed on the switch. The currently configured value is shown when the web page is displayed. The range of acceptable values for this field is (0-5). 6. Use Login Authentication List to select an authentication list from the pull down menu. This list is used to authenticate users who try to login the switch. 7. Use Enable Authentication List to select an authentication list from the pull down menu. This list is used to authenticate users who try to get "enable" level privilege. 8. Click REFRESH to refresh the web page to show the latest SSH Sessions. Table 6-89. Field Current Number of SSH Sessions Keys Present Description Displays the number of SSH connections currently in use in the system. Displays which keys, RSA, DSA or both, are present (if any). Chapter 6. Managing Device Security | 459