Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 81

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual To display the Stack Configuration page, click System > Stacking > Basic> Stack Configuration. A screen similar to the following displays. 1. Use Management Unit Selected to select the unit to be managed unit and click APPLY to move the management to the selected unit. 2. Unit ID displays the list of units of the stack. Details of the selected unit are displayed. There is also an ADD option visible only to Admin users which can be used to pre-configure new members of the stack. 3. Use Switch Type to specify the type of switch hardware when creating a new switch in the stack. 4. Admin Management Preference is a 2-byte field that indicates whether the administrator wants this unit to become a management unit in preference to another unit. The default value for this setting is one. If the preference level is set to zero then the device cannot become a management unit. This field is non-configurable for users with read-only access. 5. Click ADD to add a unit to the stack with the specific switch type. 6. Click DELETE to remove the selected unit from the stack. Chapter 2. Configuring System Information | 81