Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 202
Src/Dest MAC, VLAN, EType, incoming port, Dest MAC
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual • Dest MAC,VLAN,EType,incoming port -Destination MAC, VLAN, EtherType, and incoming port associated with the packet. • Src/Dest MAC,VLAN,EType,incoming port - Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet. • Src IP and Src TCP/UDP Port fields - Source IP and Source TCP/UDP fields of the packet. • Dest IP and Dest TCP/UDP Port fields - Destination IP and Destination TCP/UDP Port fields of the packet. • Src/Dest IP and TCP/UDP Port Fields - Source/Destination IP and source/destination TCP/UDP Port fields of the packet. 3. Use Link Trap to specify whether you want to have a trap sent when link status changes. The factory default is enable, which will cause the trap to be sent. 4. Use Admin Mode to select enable or disable from the pull-down menu. When the LAG is disabled no traffic will flow and LACPDUs will be dropped, but the links that form the LAG will not be released. The factory default is enable. 5. Use STP Mode to enable or disable the Spanning Tree Protocol Administrative Mode associated with the LAG. The possible values are: • Disable - Spanning tree is disabled for this LAG. • Enable - Spanning tree is enabled for this LAG. 6. Use Static Mode to select enable or disable from the pull-down menu. When the LAG is enabled it does not transmit or process received LACPDUs i.e. the member ports do not transmit LACPDUs and all the LACPDUs it may receive are dropped. The factory default is disable. 7. Click DELETE to remove the currently selected configured LAG. All ports that were members of this LAG are removed from the LAG and included in the default VLAN. Table 3-73. Field LAG Description LAG ID LAG State Configured Ports Active Ports Description Enter the Description string to be attached to a LAG. It can be up to 64 characters in length. Identification of the LAG. Indicates whether the Link is up or down. Indicate the ports that are members of this port-channel Indicates the ports that are actively participating in the port-channel. 202 | Chapter 3. Configuring Switching Information