Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 264

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual RIP Status Table 26. Field Description Interface IP Address Displays the interface for which data is configured. Displays the IP Address of the router interface. Send Version Displays the version of RIP control packets the interface should send from the pull-down menu. The value is one of the following: • RIP-1 - send RIP version 1 formatted packets via broadcast. • RIP-1c - RIP version 1 compatibility mode. Send RIP version 2 formatted packets via broadcast. • RIP-2 - send RIP version 2 packets using multicast. The default is RIP-2. • None: no RIP control packets will be sent. Receive Version Displays what RIP control packets the interface will accept from the pull-down menu. The value is one of the following: • RIP-1 - accept only RIP version 1 formatted packets. • RIP-2 - accept only RIP version 2 formatted packets. The default is RIP-2. • Both - accept packets in either format. • None - no RIP control packets will be accepted. Admin Mode Link State Bad Packets Received Enables RIP for an interface. The default is Disable. Indicates whether the RIP interface is up or down. The number of RIP response packets received by the RIP process which were subsequently discarded for any reason. Bad Routes Received Updates Sent The number of routes, in valid RIP packets, which were ignored for any reason (e.g., unknown address family, or invalid metric). The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information. Click REFRESH to show the latest RIP information. 264 | Chapter 4. Routing