Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 622
Apply, Operation Mode is MSTP and the Configuration Name is the switch MAC address.
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 622 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Ports 1/0/1 - 1/0/5 Connected to Hosts Ports 1/0/1 - 1/0/5 Connected to Hosts Ports 1/0/6 - 1/0/8 Connected to Switch 2 and 3 1/0/1 - 1/0/5 Switch 1 Root Bridge Ports 1/0/6 - 1/0/8 Connected to Switch 1 and 3 Switch 2 Ports 1/0/6 - 1/0/8 Connected to Switch 2 and Switch 3 Ports 1/0/1 - 1/0/5 Connected to Hosts Perform the following procedures on each switch to configure MSTP: 1. Use the VLAN Configuration screen to create VLANs 300 and 500 (see "VLAN Configuration" on page 3-132). 2. Use the VLAN Membership screen to include ports 1/0/1 - 1/0/8 as tagged (T) or untagged (U) members of VLAN 300 and VLAN 500 (see "VLAN Configuration" on page 3-132). 3. From the STP Configuration screen, enable the Spanning Tree State option (see "STP Configuration" on page 3-153). Use the default values for the rest of the STP configuration settings. By default, the STP Operation Mode is MSTP and the Configuration Name is the switch MAC address. 4. From the CST Configuration screen, set the Bridge Priority value for each of the three switches to force Switch 1 to be the root bridge: • Switch 1: 4096 • Switch 2: 12288 • Switch 3: 20480 Note: Bridge priority values are multiples of 4096. If you do not specify a root bridge and all switches have the same Bridge Priority value, the switch with the lowest MAC address is elected as the root bridge (see "CST Configuration" on page 3-157). 5. From the CST Port Configuration screen, select ports 1/0/1 - 1/0/8 and select Enable from the STP Status menu (see "CST Port Configuration" on page 3-159). 6. Click Apply. 622 | Appendix B. Configuration Examples