Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 380

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual 1. Interface - The interface for which data is to be configured or to be displayed. 2. Use Admin Mode to set the administrative status of PIM-SM in the router. The default is disable. 3. Use Hello Interval(secs) to enter the time in seconds between the transmission of which PIM Hello messages on this interface. The valid values are from 0 to 18000. The default value is 30. 4. Use Join/Prune Interval(secs) to enter the frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The valid values are from 0 to 18000. The default value is 60. 5. Use BSR Border to set BSR border status on the selected interface. 6. Use DR Priority to enter the DR priority for the selected interface. The valid values are from 0 to 2147483647. The default value is 1. Table 73. Field Protocol State IPv6 Prefix/Length Designated Router Neighbor Count Description The state of PIM-SM in the router: either operational or non-operational. The IPv6 Address Prefix and the Length of the selected interface. The Designated Router on the selected PIM interface. The number of PIM neighbors on the selected interface. 380 | Chapter 4. Routing