Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 371
Admin Boundary Configuration, IPv6 Multicast
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Admin Boundary Configuration The definition of an administratively scoped boundary is a mechanism to stop the ingress and egress of multicast traffic for a given range of multicast addresses on a given routing interface. To display the Admin Boundary Configuration page, click Routing Multicast Admin Boundary Configuration. 1. Use Interface to select the router interface for which the administratively scoped boundary is to be configured. 2. Use Group IP to enter the multicast group address for the start of the range of addresses to be excluded. The address must be in the range of 239.0.0.0 through 239.255.255.255. 3. Use Group Mask to enter the mask to be applied to the multicast group address. The combination of the mask and the Group IP gives the range of administratively scoped addresses for the selected interface. 4. Click ADD to add a new administratively scoped boundary. 5. Click DELETE to delete the administratively scoped boundary selected. IPv6 Multicast From the IPv6 Multicast link, you can access the following pages: • Mroute Table on page 372 • IPv6 PIM-DM on page 374 • IPv6 PIM-SM on page 377 • MLD on page 385 • Static Routes Configuration on page 397 Chapter 4. Routing | 371